Mold Remediation

Mold remediation becomes a solution to a growing problem inside a home or business when there’s excessive humidity or moisture for an extended period of time. The problem can originate from sudden water releases, like a burst pipe or large spill that goes untreated, or from a chronic condition, such as a leaking roof or plumbing. Even high humidity or warm, moist air condensing on cool surfaces can trigger mold problems. It’s always best to have the mold evaluated and removed by a certified professional.

Mold can grow almost anywhere in a home or business if conditions permit. If there is visible growth on painted wall surfaces, property owners should be concerned about what may be growing on the wall’s opposite side. The environment inside the walls of a house often differs drastically from the outside and could create a perfect haven for mold. If the wall remains wet for a prolonged period, it’s almost guaranteed that the mold growth on the back side will be worse than on the front. At that point, mold remediation will entail containing the work space and removing moldy materials, followed by cleaning of salvageable framing.

24/7 Restoration’s IICRC certified professionals have the training and experience to:

• Identify moisture sources
• Evaluate mold growth (visible or suspected)
• Contain damage to the smallest area possible
• Physically remove contamination
• Dry materials to ensure that mold will not return
• Perform or recommend procedures for returning property to a pre-loss condition

The cleantrust outlines five major principles of Mold remediation.

1. Make sure safety and health precautions are taken by cleanup professionals and occupants. Mold-contaminated buildings can be associated with a number of health problems. Anyone involved in the mold remediation process must be protected from exposure through a combination of practices and controls.
2. A post-cleanup assessment by an independent environmental expert. An effective mold remediation cannot be developed without first determining the extent of the contamination to be removed. To ensure that remediation work is being properly performed, it is highly recommended that appropriate documentation of the remediation process be kept by project management
3. Control of mold before it spreads further. Eliminating mold at the source of contamination is essential. Once mold spores spread through the air, it will be much more difficult to capture.
4. Oversee the proper physical removal of the mold. The mold must be physically removed from the structure. Attempts to isolate mold or remove signs of mold on the surface are not adequate. Note that bleach alone cannot kill mold.
5. Ensure that moisture is controlled to limit future contamination or re-contamination. Mold growth is virtually inevitable if moisture is not controlled. Moisture problems must be identified, located and corrected or controlled as soon as possible.

Application of these principles may involve multiple disciplines and professionals from a wide range of restoration and indoor environmental fields.

Contact 24/7 Restoration Now!